archerbeauty6 – https://www.repairmywindowsanddoors.co.uk/huntingdon-windowrepair/

How to Replace Door HandlesThe door handles in your home are an essential part of the interior design. A new handle can bring your home’s decor up to date.As time passes, your knobs on your doors may begin to feel stiff and even break. These are indications that it’s time to change the knobs. This guide will help you choose the appropriate replacement door handle for your home.Door KnobsThe handles on your doors will enhance the appearance of your house and make it easier to open and shut them. They come in a variety of finishes, colors and types to match your decor. If yours have started to show signs of wear or require an upgrade it is possible to replace them in a couple of simple steps.The first thing you need to find is the spindle or shaft through the knob’s attachment to the door. Some knobs have a small opening that you can access with a screwdriver for removal of the set screws that hold the handle in place. Some have a tiny slot or hole that you can press a spring-activated detent pin with a flathead. This pin releases the latch mechanism and lets you pull or push the knob.After you have ahold of the spindle or shaft, take off the door knob and replace it with the new one. Check whether the latch works before tightening the new set screws.After replacing the knob, put the rod for the latch into the door’s hole. Interlock it with the rod system on the second knob. Make upvc replacement door handles that the holes are aligned, then tighten the screws on the latch plate.Some people prefer a brushed or smooth metal finish for their door hardware to give their home a modern and sleek look. This can be matched with the furniture they have. Some prefer a rustic design that works well with farmhouse-style rooms. If you have members of your household with mobility limitations, you may want to consider choosing an rim lock or a lever-style door knobs, which require less pressure to operate.Other aspects are being looked at more and more when it comes to the design of door handles. Accessibility and control of infections are key considerations when it comes to developing new designs for handles. For instance certain handles can be operated with the arm of a person.LatchThe latch that keeps your door handle open can wear out from age and use. The replacement of the latch to accommodate the new handle is a simple DIY job and will make a huge difference in how your door opens and closes.Depending on the type of handle you have depending on the type of handle you have, the latch may be part of the knob itself, or it might be an independent piece that is attached to the door itself. In either case, you will follow the same steps for removing and replacing. Removing the old latch of the way is relatively simple, especially if your door handle has what is known as a “magic button”. The tiny pressure-slot, which is located on the side knob is the one you’ll have to press to pop the latch out of the handle.If your handle does not have this button, you’ll have to take off the cover plates placed over the latch plate. These are usually circular or rectangular and can be removed using a screwdriver in order to remove them off the handle. Some have slots where you can place your screwdriver. Other handles simply snap off.The next step is to unscrew the two machine screws that secure the latch and the inner plate to the door handle. These are the shorter screws with a pointy tip and you’ll have to store them in a safe place to reuse them in later steps. After the screws have been removed, you can take the latch plate as well as the mechanism from the hole and put it aside.Then you can begin to install the new latch. Insert the inside plate of the latch into the hole in the door and secure it with the hardware provided. Make sure that the square pin on interior of the latch is facing the latching mechanism in the handle and is aligned with the screw holes on the other sides of the handle. Then, push the exterior latch plate onto the handle and secure it with the screws provided.Strike PlateOne of the most frequent reasons for replacing the door handle is because it is loose or isn’t locking properly. This is often due to misaligned components in the latching mechanism, for example an unbalanced strike plate that is too small or has moved up or down on the doorjamb as time passes. This project allows you replace your old strikeplate with a longer one, which will offer better security for your door and ensure it stays closed.Apply a lipstick or other marking material on the bolt that you are using to check if it is the strike plate. Close the door and try to latch it. If the mark is located below the strike plate hole, this means that your door won’t latch due to the fact that the plate isn’t long enough. If the mark is over the strike hole on the plate, it’s likely that the strike plate has been moved up or down on the doorjamb.Depending on your door You may be able to just screw the new strike plate into the door over the old one using the screws included with it. It is possible that you will need to first drill holes and then chisel the wood to ensure a tight fit. If this is the case, you must be cautious not to chisel too much or you may damage the strength of your doorjamb.You can also consider installing a new box strike plate, which will give the lock a more secure grip on the door and requires more force to open it. Typically it will require two longer screws that secure the strike plate to the frame of the door. It is necessary to remove the old strike plate before drilling and chiseling the wood to create space for the new one.This hard-to-find strike plate is specifically designed to work with rim locks from the past, and it’s constructed of durable solid brass in an extremely thick. It comes with machine screws and wood screws, so you’ll have the right hardware for the job. Just remember that wood screws have a pointy tip, whereas the machine ones are more blunt.