foxnode78 – https://www.repairmywindowsanddoors.co.uk/uxbridge-windowrepair/

How to Replace Door HandlesDoor handles are a key part of your home’s decor. A new handle will bring your decor and space modern.Over time the knobs on your door could become stiff, or even break. These are signs it’s time to replace them. This guide will help you pick the correct door handle replacement for your home.Door KnobsDoor handles add to the look of your home while also making it easier for people to open and close doors. They are available in a variety of colors, finishes and styles that will complement your decor. If yours have started to show signs of wear or require an upgrade You can replace them in a couple of simple steps.You need to locate the shaft, or spindle through which the knob is attached to the door. Some knobs have a tiny opening that you can access with a screwdriver to remove the set screws that keep the handle in place. Some have a tiny slot or hole that allows you to press a spring-activated detent pin with flathead. This pin releases the latch mechanism and allows you to pull or push the knob.After you have ahold of the spindle or shaft, take the knob off of the door and replace it with the new one. Check whether the latch works before tightening the new set screws.After replacing the knob, you can place the rod for the latch into the door’s hole. Lock it in place using the rod system on the second knob. Make sure that the holes are aligned then tighten the latch plate screws.upvc door handle opt for a smooth or brushed metal finish for their door hardware to create an elegant, modern look that matches other furnishings in their homes. Others prefer a more rustic look which is great for farmhouse-styled spaces. If you have a member of your family who has mobility issues, you may want to choose the lever or rim lock that requires less pressure to operate.While aesthetics have been the main consideration when it comes to door handle design, other aspects are increasingly being considered too. Accessibility and control of infections are the main issues that have led to the creation of innovative new handle designs including ones that can be operated using a person’s forearm.LatchThe latch that holds the handle of your door open may wear out as time passes. It is simple to replace the latch on your door handle. This will make an enormous difference in the way it opens and closes.Depending on the type of handle you have the latch could be part of the knob itself or it might be an independent piece that is attached to the door itself. In either situation, the same procedure to remove and install is applicable. Removing the old latch of its place is quite simple, especially if your door handle has what’s known as a “magic button”. This tiny pressure-slot, found on the side knob, is what you have to press to remove the latch of the handle.If your handle does not have this magic button the first step is to take off any cover plates that sit over the latch plate. They are typically circular or rectangular and can be removed using a screwdriver to pull them off of the handle. Some have a tiny slot in them where you can put your screwdriver through, while others snap off.Then, unscrew the machine screws that secure the latch and the plate to the door handle. You’ll need to keep the screws that are shorter and have an angled tip in a safe place so that you can reuse them in the future. Once the screws are removed, you can take the latch plate as well as the mechanism from the hole, and then set it aside.Then you can begin to install the new latch. Insert the latch plate into the door hole and secure it using the hardware supplied. Make sure that the square pin on the interior of the latch is facing the latching mechanism inside the handle and is aligned with the screw holes on the other sides of the handle. Then fix the exterior latch plate using the screws supplied.Strike PlateIt is typical to replace a door handle if it is loose or doesn’t lock properly. This is typically caused by misaligned parts in the latching system, such as a striking plate that’s either too small or has moved upwards or downward on the doorjamb with time. This project lets you replace your old strikeplate with an extended one, which can provide greater security for your door and ensure it stays shut.Apply a lipstick or another marking material on the bolt that you are using to check if it is the strike plate. Close the door and attempt to latch it. If the mark is lower than the strike plate’s hole, it means that the plate is too small and the door will not latch. If the mark is above the strike hole on the plate, it’s likely that the strike plate has been moved upwards or downwards on the doorjamb.Depending on the door You may be able to just install the new strike plate in the door over the old one with the screws that come with it. You may need to drill holes first and then chisel the wood to ensure a secure fit. If this is the case, be careful not to chisel too deeply or you could ruin the strength of your doorjamb.Installing a new style box strike plate will give the lock a more secure hold on the doors and will require more force to open them. Typically it requires two long screws to secure the strike plate to the door frame. You’ll need to remove the old strike plate and then drill and chisel the wood to make room for the new one.This rare strike plate is made of solid brass and comes with a thick, heavy-duty. It’s designed to be used on antique rim locks. It comes with machine screws and wood screws, so you’ll have the right hardware for the job. Be aware that wood screws have a pointy tip, while the machine screws are more blunt.