mooniris40 – https://www.repairmywindowsanddoors.co.uk/rushden-windowrepair/

Door Handle ReplacementIt’s worth it to replace door handles if you aren’t happy with the way they look, or if they are difficult to use. Installing a new door handle is easy if you have patience.Modern door handles are usually equipped with cover plates that conceal the screws for an attractive look. If the new handle doesn’t already have them connected, you’ll need to attach them separately.Remove the Old HandleThe door handle is not just a decorative feature for your home, but it’s also a safety feature that allows you to lock and unlock the door. Over time the door handle could begin to lose its grip or feel a bit loose. It could also appear old and worn. This is an indication that it’s the time to replace your door handle.If your door handle is becoming difficult to use, it could be time to replace it. This is a problem because it means that you can not lock or unlock your door which could be the risk of security for you and your family.Another reason to replace your door handle is when it’s damaged or broken. A broken door handle can be very dangerous, especially when your children or elderly family members are unable to open it and end up trapped inside. Fortunately, it’s fairly simple to fix a damaged door handle by replacing the old one.Modern door handles are generally standard sizes and should fit any door. If you are not certain if the new door handle you are buying will work, remove the old one and take measurements of its holes in the housing. This will help you to buy the correct sized door handle.It is the easiest way to take off the old door handle by taking it off from the door. Usually, a screwdriver is used. However some door handles have the cover plate which hides the mounting screws, so you’ll have to cut off this to reach the screws beneath. After you’ve removed the old handle, take a note of how the spindle is positioned so that you can align it when you fit your new one.Alternatively, you can remove the door handle by uncrewing it from the latch mechanism. This is usually done using a screwdriver but you’ll need to find the small latch, which is located at the edge of the trim piece. After removing the latch, unscrew the handle and the strike plate. Then remove the latch from the edge of the door.Take off the Strike PlateIf you are replacing the handle, you’ll be required to replace the latch plate, which holds the hole that the door’s latch is inserted into when it closes. The package the new handles come in will have two different latch plates: either a rectangular or circular (see the diagram above detailing the components of a door handle). If your current latch plate is rectangular in shape, swap it out for the circular one so that the latch is able to hook into the strike plate in a manner that makes the handle easier to operate.The first step is to unscrew the screw that is holding the old latch plate in place. The screws are usually quite tight and require a bit of force to loosen them. It is helpful to get a second person to assist in this area if it is possible.Once the screws are removed the latch should slide out of the door easily. If it is stuck or doesn’t move then use a small nail file to scratch around the edges of the latch plate. This will sometimes free the plate up.You can now move on to preparing the new door strike plate to be installed. Utilizing the screws made of wood that came with the new handles, attach the latch plate onto the inside of the doorjamb. Be careful not to tighten too much the screws, as this can cause damage to the strike plate.If you’re not sure whether the latch plate is in the right position You can try closing and opening the door to check if it closes and latches correctly. If not you’ll have to adjust the strikeplate upwards or down or forward or back until the door closes properly.If the door continues to move or jiggles, you might need to increase the size of your latch hole on the strike plate. This is more prevalent on older doors. It could be caused by wear and tear hinges that aren’t small, a incorrect size of the latch or a damaged strike plate. If this is the situation, use a metal filing instead of a chisel or hammer to adjust the strike plate.Remove the LatchThe latch is a curved metal piece that slides in and out of a hole on the inside of your door. The latch is pushed forward when you turn the handle. It also connects to a hole in the door frame to keep the door shut. If your door wobbles when you close it, an upgrade to the latch could be the only thing needed to fix the problem.The screws that hold the door latch are difficult to see, but you can usually put a screwdriver in a small hole on the trim plate, and then pull the latch off. After removing the trim plate, you will be able to pull off the latch as well as the bolts that hold it and the spindle.If the latch cannot be easily removed using a paperclip or tool to remove it from the handle mechanism. Place the item into the recessed slot of the latch, and gently twist it or jiggle until you feel handle and latch begin to break off. You may have to do this several times before the latch becomes loose enough to allow it to be pulled out.You should be able to slide the new latch into its slot without any problems after you have removed the old one. Use the new screws to connect the latch to the strike plate or door frame. Make sure it is correctly positioned in the slot, aligned with the screw chambers.Before installing the new handle, make sure to measure your current backset (the distance from the centre of the big hole on the front surface of the door to the edge). You should also check whether the size of the latch on the new handle matches the measurement of your existing handle.If you are replacing the latch or handle or handle, or if the old lock cylinder is damaged, then you will need a new one. If you’re not changing the locks, the new latch will fit in your existing recess, and work with the keys you have currently. Be sure to choose an entry point with a rectangular cover plate that match your old handles.Remove the cover plateYou can replace your door handles with a modern lever and rose design to make a difference in the appearance of your home. You can buy complete sets of escutcheons, escutcheons, privacy adaptors and escutcheons.The first step in replacing the door handle inside is to remove the cover plate or rose, which conceals the screws and the mechanism within. Find an opening tab on the plate, and employ a flathead screwdriver remove it from the knob. It could have an opening along one side or be secured by pins.Remove the screw that holds the interior handle and place it aside when the cover plate is removed. It is also necessary to take out the screws that hold the latch and inner plates and the latch plate, which can be done by loosening them with the help of a Philips screwdriver. Remove the plates that hold the inner plate and latch from the door. Put them away.Most doors have an opening between the jamb of the door and the edge of the frame, which allows for a handle, however not all have. If yours doesn’t have a handle, you’ll need to make a hole into the door. This is the same process as opening a locked door however, you’ll have to be extra cautious not to harm the frame or door.After the holes are drilled after which you’ll have to put in new screws for the door knob. Be sure to purchase the same size as the old ones, to ensure that you don’t end up with the handle that is too tight or loose. Installing a new strike rod and latch is also mandatory. These are not included in the majority of door handle sets.Amazon’s Choice FAERSI 2-piece chrome finish handle sets are a fantastic choice if you’re in the market of a top-quality interior door handle replacement set. It’s factory-fitted and has received hundreds of 5-star reviews. It’s a great choice to replace worn or damaged door hardware on your Chevy.