pipespruce3 – https://www.repairmywindowsanddoors.co.uk/aylesbury-windowrepair/

How to Replace Door HandlesThe door handles of your home are an important element of your design. A new handle can transform your home and bring your decor to the present.Over time the knobs on your door may become stiff, or even break. These are signs that it’s time to replace the knobs. This guide will help choose the correct door handle replacement for your home.Door KnobsDoor handles add to the look of your home while also making it easier for people to open and shut doors. They are available in a wide range of colors, finishes and styles that will complement your decor. If yours have started to show signs or need an upgrade it is possible to replace them in a couple of simple steps.The first thing you have to do is locate the spindle or shaft through which the knob is affixed to the door. Some knobs have a small opening that you can access with an screwdriver to take out the set screws that keep the handle in place. Some have a slot or hole in which can be used with the flathead screwdriver on a spring-activated pin called a detent. When you press this pin it opens the latch mechanism and lets you pull or push on the knob.Once you have access to the shaft or spindle take the knob off of the door and replace it with the new one. Check whether the latch works before tightening the new set screws.After replacing the knob, you can place the rod that is attached to the latch over the hole on the door. Lock it in place using the rod system on the second knob. Make sure the holes are lined up and then thread in the latch plate screws and tighten them.Some people prefer a brushed or smooth metal finish for their door hardware to give their home a sleek and contemporary appearance. This will match their furniture. Others prefer a more rustic design that is a good match for rustic-styled rooms. If you have members of your household who have mobility issues You may be interested in a rim lock or lever-style door knobs that require less pressure to operate.Other factors are being taken into consideration more and more in the design of door handles. Accessibility and control of infections are the main issues that have led to the creation of new and innovative designs for handles like those that can be operated with the forearm of a person.LatchThe latch that keeps your door handle open is prone to wear and tear due to age and use. It is simple to replace the latch on your door handle. This will result in a big difference in how it opens and closes.Depending on the type of knob you have depending on the type of handle you have, the latch may be a part of the knob itself, or it could be an individual piece that is attached to the door. In either situation, the same procedure for removing and reinstalling will be used. It’s easy to remove the old latch, particularly if you have doors with a “magic” button. The tiny pressure-slot, which is located on the side knob is what you will need to press in order to remove the latch of the handle.If your handle does not have this magical button the first step is to remove any cover plates that are positioned over the latch plate. They are typically rectangular or circular and can be removed by using a screwdriver in order to remove them off the handle. Some have a slot in which you can place your screwdriver. Other handles simply snap off.The next step is to loosen the two machine screws that hold the latch and the inner plate to the door handle. These are the screws with a pointy tip – you will need to keep these in a safe location to reuse them in subsequent steps. Once these are off, you can take the latch plate and mechanism out of the hole in the door and put it away.Now you can begin installing the new latch. Install the latch plate into the door hole and secure it using the hardware provided. Make sure the square pin that is on the interior of the latch is facing the latching mechanism inside the handle and that it lines up with the other screw chambers inside the door handle. Then, push the outside latch plate on and secure it using the screws supplied.Strike PlateOne of the most common reasons for replacing a door handle is because it is loose or doesn’t lock properly. upvc door handles is usually caused by malfunctioning parts of the latching mechanism, such as a strike plate that is too short or has moved up or downward on the doorjamb over time. This easy project allows you to replace your old strike plate with a new, larger one that can provide greater security and keep your door closed.Apply some lipstick or other marking material on the latch bolt to determine if it’s the strike plate. Close the door and try to latch it. If the mark is located below the strike plate’s hole, this indicates that your door isn’t latching because the strike plate is too small. If the mark is above the strike hole on the plate, it’s likely that the strike plate has been moved up or down on the doorjamb.Depending on the door, you may be able to install the new strike plate into place over the old one with the screws that come with it. However, you may need to pre-drill holes and then chisel some of the wood to ensure it’s snugly fitted. If this is the case, be careful not to chisel too deeply or you could damage the strength of your doorjamb.You could also try installing a new box strike plate which gives the lock a much more secure grip on the door and requires more force to open it. It usually requires two larger screws to anchor the strike plate into the door frame. It is necessary remove the old strike plate and then drill and chisel the wood to create space for the new one.This difficult-to-find strike plate is made from solid brass and has a heavy-duty thickness. It’s specifically designed to be used with antique rim locks. It comes with both machine screws and wood screws, ensuring that you have the right hardware for your job. Be aware that wood screws have a pointy tip, while the machine screws are more blunt.