saltswiss6 – https://www.repairmywindowsanddoors.co.uk/christchurch-cat-flap-installer-near-me/

Fitting a cat flap can seem intimidating but it’s easy to do with the proper instructions. First, determine the height you want the flap to be (on average or belly height). Then, mark this area on the door, and use the template provided as a guide to drill.If you have a kitten who is still a newborn and you want to keep the door open, gently prop it slightly open and allow it to pass through. Reward the kitten every time it goes through.Measure the DoorA cat flap lets your pet to enter and exit your home at its convenience. This will help keep your cat healthy by ensuring that it gets exercise as well as being able to come back in if it is stuck outside in bad weather, particularly in winter. It also can reduce the amount of time you need to spend letting it in or out and can also keep your home safe by allowing you to know when it’s been out.It is essential to ensure that the cat flap is placed correctly in order to prevent your pet from being forced through it or escaping by other animals (e.g. dogs). It is essential to measure the height of your pet’s belly and the doorway to your home so that you can make sure that the flap is at the proper height. You can alter the height of your flap if your cat is smaller or taller than average.Next, use a spirit-level to mark the middle of the door. This is where you will put in the flap. Using the marking as a guide, take the jigsaw and cut the form of the flap in the door. After cutting the area out, sand down the edges to create smooth surfaces. Drill any holes you need to.The process of installing a cat flap isn’t as complicated as you think and it should not take more than two hours for the entire job from start to completion. However, the process could be a little more complicated in the event that you have to put it inside a uPVC or composite door since these doors have an array of thicknesses that can affect the way the holes are cut and the type of door they are fixed to. This is the reason we recommend hiring a professional to complete the task, especially when you’ve never dealt with glass before.Measure Your CatA cat flap will save you from hearing your pet’s cries to let it out or in. This is particularly useful if you are at work all day and your cat is stuck inside waiting until you get home in all weathers.If you want to fit a cat flap inside your door, it is crucial that you take measurements of your cat prior to attempting the task. It may appear to be a simple task, but it is crucial to make sure you measure the right measurements. If not, your cat may have difficulty putting it in use.First, make sure that your cat is calm before you begin taking measurements. You’ll need to keep them in a way that they are not able to move, and make sure that the measuring tape or ruler is flat against their body, not bending in any place. Holding the measuring tape or ruler against their body from the top of their head to the tip of their tail can allow you to get an exact measurement.Once you have the measurement of your cat, it’s time to take a look at the door and decide where to place the flap. Position the flap at the level of your cat’s belly. This will allow them to walk through the door without much effort. This will also prevent the flap from making a lot of noise as it moves back and back.You will also need to consider the thickness and structure of the uPVC door or composite. While all timber doors have the same thickness to them, uPVC or composite doors are different in their overall structure. This can make the process of putting in a flap for your cat more difficult, as you have to make sure that the hole is the proper size.It is also worth studying the instructions included with the kit to locate an illustration template that can be used to mark the position of the hole in the door. This will help you determine the location where the opening should be and make sure the template is correctly positioned on the door. Using a spirit level to ensure that the template is sitting right against the door will also be very helpful.Cut the FlapBefore you can install your cat flap you must cut the door’s panel to create a space large enough to accommodate it. This is a difficult job, and it is recommended that you seek out the assistance of a professional cat flap fitter for this step should you not have the expertise or knowledge to do it yourself. You can also read the instructions included in the kit to find out how to do it right.You can use the height of the cat’s or kitten’s stomach to guide you. As a rule of thumb you should place the flap approximately 10-15 centimeters above the ground. This is the typical height of the belly for cats. This way your cat will be able to move through the flap comfortably and will also make any other cats or curious neighbours a tough time trying to enter or leave.Once repairmywindowsanddoors.co.uk decided the best location for the cat flap to be placed, mark this location on the door using a pencil. Next, if your kit comes with an outline of paper, place this over the door and use the marks to drill holes into every corner of the template. Then, you should be able cut out the design of the template and replace it with your cat flap.If you are installing your cat flap in the form of a door made of wood or uPVC, you are able to do it yourself if feel confident enough to handle a Jigsaw. Make sure you don’t cut through any of the door mullions or vertical rails. You can use a jigsaw to cut your panel into a square or circle according to the way you’d like it. Remember to take your time and don’t make the jigsaw cut faster.Once the hole is cut, carefully place the cat flap into its new place of residence. Make sure it’s solidly secured. If the flap has screw caps then push them into the protruding bolts. Once the screws are in place, sand the rough edges of the cut then apply sealant to any gaps to ensure there aren’t any draughts getting into your home.Fit the FlapIf you have a standard cat flap, you can encourage your pet to go through it by placing a small amount of cat food on the outside of the door. You can also try pushing the cat through with your hands or with a stick. Once your cat is accustomed to moving through the flap, it should be able to go in and out as it wants, so you can let it in or out without holding the door open for it all day (and potentially in all weather conditions).It is possible to fit an animal flap inside the UPVC or glass doors although this may not be exactly the same as fitting one into a wood external door because the UPVC and glass doors don’t have the same thickness. This could have a significant impact on the way you cut out the flap’s hole, and how well the flap fits after installation.Depending on the type of cat flap you select, it may include a mounting kit as well as a template that will show precisely where to drill the holes for it. If the kit doesn’t include a template you can copy it to create your own. It’s important not to use the jigsaw to in order to cut, so it doesn’t leave a bigger than necessary hole in your door.The majority of cat flaps are rectangular or square in shape, but there are some that are circular, and they are typically more difficult to install. If you have a round flap, make sure that the hole is in the correct spot on the door. In the event that it is not, the cat may not be able to access it, and could be locked outside for the entire day (or at night).Certain cat flaps come with locks that allow you to control the time your cat enters and leaves. These can be very useful in the event that you are worried about your cat going out at night and coming back in because of the darkness, or if you’re at work for the entire day. Certain locks can be used to lock entrance or exit, while others can be locked both ways. This is helpful for sick or elderly cats who do not want to go outside in bad weather.